路漫漫其修遠兮，吾將上下而求索，又到了周末，我繼續帶各位看官學習回顧Mysql知識。

上次說到了流程控制函數，那就從流程控制函數來繼續學習吧！

#五.流程控制函數#1.if函數:if else的效果IF(條件表達式,成立返回1,不成立返回2)#與Java三元運算相同SELECT IF(10>5,’大’,’小’);

SELECT last_name,commission_pct,IF(commission_pct IS NULL,’沒獎金呵呵’,’有獎金嘻嘻’) AS 備注FROM employees;

#2.CASE函數的使用一: swirch case的效果【等值判斷】回顧:switch(變量或表達式){case 常量1:語句1;break;...default:語句n;break;}mysql中case 要判斷的字段或表達式或變量when 常量1 then 要顯示的值1或者語句1;[語句要加分號，值不用加]when 常量2 then 要顯示的值2或者語句2;...slse要顯示的值n或者語句n;[默認值]end[結尾]case在SELECT后面相當于表達式用，后面不能放語句，只能是值.在后續的學習中，存儲過程與函數內就可以單獨,用不搭配SLECT,就用語句.先是表達式的操作案例:查詢員工的工資,要求部門號=30，顯示的工資為1.1倍部門號=40，顯示的工資為1.2倍部門號=50，顯示的工資為1.3倍其他部門，顯示的工資為原工資

SELECT salary 原始工資,department_id,CASE department_idWHEN 30 THEN salary*1.1WHEN 40 THEN salary*1.2WHEN 50 THEN salary*1.3ELSE salaryEND AS 新工資FROM employees;

#2.CASE函數的使用二:類是于多重IF【區間判斷】回顧Java中:if(條件1){語句1;}else if(條件2){語句2;}...else{語句n;}

mysql中:casewhen 條件1 then 要顯示的值1或者語句[語句后面要加分號;]when 條件2 then 要顯示的值2或者語句[語句后面要加分號;]...else 要顯示的值n或語句nend案例:查詢員工的工資的情況如果工資>20000,顯示A級別如果工資>15000,顯示B級別如果工資>10000,顯示C級別否則,顯示D級別

==============流程函數到此結束，要想熟練運用還需要勤加練習。===============

提供幾道習題供讀者試試手！

#計算有幾種工資。SELECT COUNT(DISTINCT salary),COUNT(salary)FROM employees;

#5.count 函數的詳細介紹SELECT COUNT(salary) FROM employees;

#COUNT(統計所有列)SELECT COUNT(*) FROM employees;

#把表的行生成一個列每一列都是1。統計1的總數。count里面可以用任意常量值。SELECT COUNT(1) FROM employees;

#考慮到效率問題:#5.5之前都是MYISAM 下COUNT(*)最高，計數器直接返回#5.5之后默認都是INNODB下COUNT()與COUNT(1)都差不多， 比COUNT(字段)效率高，如果是字段要判斷字段是否為NULL。

#6.和分組函數一同查詢的字段有限制SELECT AVG(salary),employee_id FROM employees;

#1.查詢公司員工工資的最大值，最小值，平均值，總和。SELECT MAX(salary),MIN(salary),AVG(salary),SUM(salary)FROM employees;

SELECT MAX(salary) AS 最大值,MIN(salary) AS 最小值,ROUND(AVG(salary)) AS 最小值,SUM(salary) AS總和FROM employees;

#2.查詢員工表中最大入職時間和最小入職時間的相差天數。#DATEDIFF計算天數。DATEIFF(參數1-參數2)SELECT DATEDIFF(NOW(),(’1995-1-1’));

SELECT DATEDIFF(MAX(hiredate),MIN(hiredate)) AS DIFFRENCEFROM employees;

#3.查詢部門編號為90的員工個數。SELECT COUNT(*) AS個數FROM employeesWHERE department_id=90;

#進階5.分組查詢GROUP BY子句語法?？梢允褂肎ROUP BY子句將表中的數據分成若干組。語法:SELECT 分組函數，列(要求出現在GROUP BY的后面)FROM 表【W(wǎng)HERE篩選條件】GROP BY 分組的列表【ORDER BY 子句】注意: 查詢列表必須特殊,要求是分組函數和GROUP BY后出現的字段特點: 1.分組查詢中的篩選條件分為兩類

2.GROUP BY 子句支持單個字段分組，多個字段分組(多個字段之間用逗號隔開沒有順序要求)也支持表達式或函數分組(用的較少)3.也可以添加排序(排序放在整個分組查詢的最后)

#引入:查詢每個部門的平均工資，保留兩位小數。SELECT ROUND(AVG(salary),2) AS 平均工資FROM employees;

#簡單的分組查詢，添加分組前的篩選WHERE#案例1:查詢每個工種的最高工資。SELECT MAX(salary) AS 最高工資,job_id AS 工種編號FROM employeesGROUP BY job_id;

#案例2:查詢每個位置上的部門個數。SELECT COUNT(*) AS 總數,location_idFROM departmentsGROUP BY location_id;

#添加篩選條件#查詢郵箱中包含a字符的，平均工資保留兩位小數，每個部門的平均工資SELECT email,ROUND(AVG(salary),2),department_idFROM employeesWHERE email LIKE ’%a%’GROUP BY department_id;

#案例2:查詢每個領導手下員工有獎金的的最高工資SELECT MAX(salary),manager_idFROM employeesWHERE commission_pct IS NOT NULLGROUP BY manager_id;

添加復雜的篩選,添加分組后的篩選HAVING#案例1：查詢哪個部門的員工個數>2#①查詢每個部門的員工個數SELECT COUNT(*),department_idFROM employeesGROUP BY department_id;

#②根據①的結果，查詢哪個部門的員工個數>2SELECT COUNT(*) AS 總數,department_id AS 部門編號FROM employeesGROUP BY department_idHAVING COUNT(*)>2;

#案例2.查詢每個工種有獎金的員工的最高工資>12000的工種編號和最高工資。#①查詢每個工種有獎金的員工的最高工資。#原始表能篩選的就放在FROM 后面用WHERE。

SELECT job_id AS 員工編號,MAX(salary) AS 最高工資FROM employeesWHERE commission_pct IS NOT NULLGROUP BY job_id;

#②根據①結果繼續篩選，最高工資>12000。SELECT job_id AS 員工編號,MAX(salary) AS 最高工資FROM employeesWHERE commission_pct IS NOT NULLGROUP BY job_idHAVING MAX(salary)>12000;

#案例3.查詢領導編號>102的每個領導手下的最低工資>5000的領導編號是哪個,以及其最低工資。#①查詢領導編號>102的每個領導手下的最低工資SELECT MIN(salary) AS 最低工資,manager_id AS 領導編號FROM employeesWHERE manager_id > 102GROUP BY manager_id;

#②最低工資大于5000的。SELECT MIN(salary) AS 最低工資,manager_id AS 領導編號FROM employeesWHERE manager_id > 102GROUP BY manager_idHAVING 最低工資 > 5000;

#案例:按員工姓名的長度分組,查詢每一組的員工個數，篩選員工個數>5的有哪些#MYSQL內GROUP BY與HAVING后面支持別名，WHERE不支持別名。但ORACLE數據庫的GROUP BY與HAVING是不支持別名的。SELECT LENGTH(CONCAT(last_name,first_name)) AS 姓名長度,COUNT(*) AS 個數FROM employeesGROUP BY 姓名長度HAVING 姓名長度 > 5;

#按多個字段分組#案例:查詢每個部門工種的員工的平均工資(保留兩位小數)。SELECT ROUND(AVG(salary),2) AS 平均工資,department_id AS 部門,job_id AS 工種FROM employeesGROUP BY 部門,工種;

#添加排序#案例:查詢每個部門每個工種的員工的平均工資,并且按平均工資的高低顯示。SELECT ROUND(AVG(salary),2) AS 平均工資,department_id AS 部門,job_id AS 工種FROM employeesGROUP BY 工種,部門ORDER BY 平均工資 DESC;

#案例:查詢部門不能為空的，每個部門每個工種的員工的平均工資,并且按平均工資的高低顯示。SELECT ROUND(AVG(salary),2) AS 平均工資,department_id AS 部門,job_id AS 工種FROM employeesWHERE department_id IS NOT NULLGROUP BY 工種,部門ORDER BY 平均工資 DESC;

#案例:查詢部門不能為空的，每個部門每個工種的員工的平均工資高于10000的,并且按平均工資的高低顯示。SELECT ROUND(AVG(salary),2) AS 平均工資,department_id AS 部門,job_id AS 工種FROM employeesWHERE department_id IS NOT NULLGROUP BY 工種,部門HAVING 平均工資 > 10000ORDER BY 平均工資 DESC;

加強練習:

#1.查詢各job_id的員工工資的最大值，最小值，平均值，總和，并按job_id升序。SELECT job_id,MAX(salary),MIN(salary),AVG(salary),SUM(salary)FROM employeesGROUP BY job_idORDER BY job_id ASC;

#2.查詢員工最高工資和最低工資的差距(DIFFERENCE)。SELECT MAX(salary) - MIN(salary) AS DIFFERENCEFROM employees;=======================================================SELECT MAX(salary) AS 最高,MIN(salary) AS 最低,MAX(salary)-MIN(salary) AS DIFFERENCEFROM employees;

#3.查詢各個管理者手下員工的最低工資,其中最低工資不能低于6000,沒有管理者的員工不能計算在內。SELECT MIN(salary),CONCAT(last_name,first_name),manager_idFROM employeesWHERE manager_id IS NOT NULLGROUP BY manager_idHAVING MIN(salary)>6000;

到此結束，MySql的統計，分組查詢到此結束。如果沒有感覺的看官可以自己手動練習一下。

夏天的太陽總是那么亮的刺眼，但多沐浴一下陽光也補鈣，想不到吧！o(^?^)o

到此這篇關于MySql中流程控制函數/統計函數/分組查詢用法解析的文章就介紹到這了,更多相關MySql 流程控制函數 統計函數 分組查詢內容請搜索好吧啦網以前的文章或繼續瀏覽下面的相關文章希望大家以后多多支持好吧啦網！